- If the screen is black, touch it.
- To turn on the projector, touch either Main Projector On or Both Projectors On.
 - If using laptop, plug VGA cable into laptop.
- To use VCR or DVD, press the VCR/DVD Controls button located on the left side of the of the touch screen.
To use only the projector on the right side of the room:
1. Press the Power on button located on the top left on the push button panel, if using a laptop press the PC button on the push panel.
 - Plug VGA cable into laptop and into COMPUTER port on control panel.
- If using VCR or DVD, plug in RCA cables and/or S-Video cable from VCR or DVD player to the control panel.
- Press the VCR button located on the push button panel.
- To control the volume, press the up/down arrows on the push button panel.
- To use Cable, press the CABLE button located on the push button panel, and change channels using the CH+ and CH- buttons.
|
