For Computer projection—

Connect VGA cable to VGA port on laptop or powerbook

Connect network & audio cable if necessary.

To turn the power on the LCD, press the PC button on the Crestron control box located on the teaching station.

To increase or decrease the volume, turn the volume button on the Crestron control box.

To show a VHS or a DVD

Put your VHS tape or DVD disk in the combo unit located on the Teaching station.

Press the Video button on the Crestron control box located on the teaching station.

To increase or decrease the volume, turn the volume button on the Crestron control box.

DVD/VHS controls are located on the combo unit?

When finished using the LCD projector, press either PC or Video button and hold down for 5 seconds to power down.

Gateway users: If image appears on the computer, but not on the projection screen, hold FN & press F3 key to toggle from PC to PC & LCD or LCD. Or for Gateway M285 hold FN and the F4 key to toggle from PC to PC & LCD or LCD.

Macintosh Titanium users: If the image does not appear on the screen, hold the OPTION button & press F7 to toggle the screens.