• Connect VGA cable to laptop.
• Connect network or audio cable if necessary.
• Using the remote control, press the ON button. 
• Press the INPUT 1 button on the remote for laptop projection.
• If using a laptop, turn on the laptop at this time.
• If showing a video or dvd, press INPUT 3 on the remote control, then press #1 on the black switch box for video or #2 for dvd.
• Audio for the video & dvd is controlled by using the speaker mounted to the wall.
• When finished using the LCD projector, press the OFF button on the remote, then press that button again while the confirmation message is displayed.
• For Macintosh Users: If the image does not appear on the screen, hold the OPTION button & press F7 to toggle the screen.
• Gateway users: If image appears on the computer, but not on the projection screen, hold FN & press F3 to toggle from PC to PC & LCD or LCD.

When you turn the power off, the LCD will cool down in about 1 minute. During the cool down time the projector lamp will not come on.

PENDING:  Switch box to control the LCD projector will be installed.