TO USE LAPTOP:

•  Connect VGA cord coming out from the ELMO into your laptop.

•  To turn on the LCD, press the power button located on the remote control.

• To use laptop, press the Computer button on the remote control, when using VCR, press the Video button on the remote control.

•  Turn on the Main Power switch on the ELMO.

•  Press the RGB1 button located on the front panel of the ELMO.

•  Turn on laptop & the image should appear on the screen.

Gateway users : If image appears on the computer, but not on the projection screen, hold FN & press F3 to toggle from PC to PC & LCD or LCD.

Macintosh users : If the image does not appear on the screen hold the FN button & press F3.

TO USE ELMO DOCUMENT CAMERA:

• Turn on the LCD projector by pressing the ON button located on the switch box found on the right side of the teaching station.
• Press the COMPUTER button on the switch box.
• Press the Main Power button on the front panel of the Elmo.
• For showing a transparency, press the LAMP button on the front panel until the base light turns on.
• For projecting printed material or 3-D objects, press the LAMP button on the front panel until the upper lamps turn on.