• Connect VGA cable to VGA port on laptop or powerbook & plug in the projector.
• Connect network cable and/or audio cable if necessary.
• Press the ON button located on the LCD projector.
• Press the INPUT button for computer projection (Input 1) or video projection (Input 3)
• Turn the computer on at this point.
• If using the VCR,  press the INPUT button on the LCD until you see INPUT3 on the screen.  Connect RCA cables to the RCA inputs on the projector & connect the other end to the RCA output on the switchbox.  Press the #1 button on the switch box & the play button on the vcr.
• If using the DVD player, press the #2 button on the switch box & the play button on the dvd player.
• When there is no INPUT signal for more than 15 minutes, the projector will shut off.
• When you turn the power off, the LCD will cool down for about 1 minute.  During The cool down time, the projector lamp will not turn on.

Gateway users: If image appears on the computer, but not on the projection screen, hold FN & press F3 to toggle from PC to PC & LCD or LCD.

Macintosh users: If the image does not appear on the screen, hold the OPTION button & press F7 to toggle the screens.