Press the ON button located on the push button panel, then press WIRED.

• Connect the VGA cable to your laptop.
• Connect the audio cable if necessary.
 

To show a video or DVD:

• Plug in RCA cables and/or S-Video cable from VCR or DVD player to push button panel.
• Press the On button, then press VIDEO or S-Video (depending what cables were used to connect).
• To control the volume, press the up/down arrows on the push button panel.

 The laptop image should appear on the projected screen.  If it does not follow these instructions:

If using a Gateway, hold the FN button & press F3 to toggle the image to the projected screen.

If using a Macintosh, hold the OPTION button & press F7 to toggle the image to the projected screen.