Integrated Media Services Home
IMS Contacts
Classroom Technology Services
Interactive TV
Services Available
Digital Video Editing
Policies
Copyright Resources
Media Streaming
Emerging Technologies/Resources
Curriculum Center
|
Gildemeister 224
Room Capacity 30
LCD-111, Sharp PG-30
|
|
Connect VGA cable to VGA port on laptop or powerbook.
Connect network cable if necessary.
Aim the remote at the projector, & press the lamp "power on" button, located on the upper left side of the remote control.
Press the INPUT button for computer projection (Input 1) or video projection (Input 3)
Turn the computer on at this point.
Press play on the vcr.
When there is no INPUT signal for more than 15 minutes, the projector will shut off.
Press Light button on bottom of remote for backlight.
At the Mouse/Adj location, make sure button is on Adj unless you want to use the laser pointer or black screen. If you would like to use these functions, move the button to Mouse.
Note: In order to turn the projector on/off, change INPUT, & change volume the button must be at Adj. When you turn the power off, the LCD will cool down for about 1 minute. During the cool down time, the projector lamp will not turn on.
Gateway users: If image appears on the computer, but not on the projection screen, hold the FN button & press F3 to toggle from PC to PC & LCD or LCD.
Macintosh users: If the image does not appear on the screen, hold the OPTION button & press F7 to toggle the screens.
|
|
