Integrated Media Services Home
IMS Contacts
Classroom Technology Services
Interactive TV
Services Available
Digital Video Editing
Policies
Copyright Resources
Media Streaming
Emerging Technologies/Resources
Curriculum Center
|
|
Gildemeister 327
Room Capacity 29
LCD-158, Sharp PG40
Note: The classroom lights must be off for the LCD projector
to work with the remote control.
|
|
Connect VGA cable to VGA port on laptop or powerbook.
Connect network cable and/or audio cable if necessary.
Aim the remote at the projector, and press the lamp "power on"
button, located on the upper left side of the remote control.
Press the INPUT button for computer projection (Input 1) or video
projection (Input 3)
Turn the computer on at this point.
If playing a video, turn external speaker on.
Press play on the vcr.
When there is no INPUT signal for more than 15 minutes, the projector
will shut off.
Press Light button on bottom of remote for backlight.
At the Mouse/Adj location, make sure slide lever is on Adj.
When you turn the power off, the LCD will cool down for about
1 minute. During the cool down time, the projector lamp will not
turn on.
Note: Gateway Users: If image appears on the computer,
but not on the projection screen, hold the FN button & press F3 to toggle
from PC to PC & LCD or LCD.
Macintosh users: If the image does not appear
on the screen, hold the OPTION button & press F7 to
goggle the screens.
|
| |
|
