To project the image only in 329: 
1. Connect VGA cable to VGA port on laptop or powerbook.
2. Connect network & audio cable if necessary.
3. Make sure the switchbox is on "B" for laptop or "A"
for desktop computer.
4. Aim the remote at the LCD & press the ON button.
5. Press the INPUT button for computer/laptop projection (Input
1) or video projection (Input 3).
6. Make sure on the Matrix Box that #1 on output A is pressed for
audio/video or #3, on output B is pressed for computer audio. 
7. Turn on the computer at this point or press play on the VCR.
8. To turn off the projector, press the OFF button twice. When you
turn the power off, the LCD will cool down for about 1 minute. During
the cool down time, the projector lamp will not turn on.
Note: Gateway Users: If image appears on the computer,
but not on the projection screen, hold FN & press F3 toggle
from PC to PC & LCD or LCD.
Macintosh users: If the image does not appear
on the screen, hold the OPTION button & press F7 to goggle
the screens.
|
