• To turn on the LCD, press the ON button located the switch box found on the teaching station. 
• Choose either COMPUTER or VIDEO.

• If using a laptop, connect vga cable to vga port on laptop/powerbook. 
• Connect network & audio cable if necessary.
• To control volume, press the V-UP or V-DOWN buttons located on the switch box.
• VCR controls are also located on the switch box.  
• When finished using the LCD projector, press the OFF button.

Gateway users: If image appears on the computer, but not on the projection screen, hold the FN button & press F3 to toggles from PC to PC & LCD or LCD.

Macintosh Titanium users: If the image does not appear on the screen, hold the OPTION button & press F7 to toggle the screens.

Note: This LCD System will not operate if the network is down.