Library 201

Capacity 16

LCD-175, Sharp XG50

• NOTE: There are two light switches located by the door.  The switch farthest from the door turns the power on for the electrical outlets used by the VCR.
• To turn on the LCD, press the ON button located the switch box found on the wall by the vcr.
• Choose either COMPUTER or VIDEO
• If using a laptop, connect vga cable to vga port on laptop/powerbook. 
• Connect network & audio cable if necessary.
• To increase or decrease the volume, press the V-UP button to increase or V-DWN button to decrease volume.
• VCR controls are also located on the switch box.
• When finished using the LCD projector, press the OFF button.

• Gateway users: If image appears on the computer, but not on the projection screen, hold FN & press F3 to toggle from PC to PC & LCD or LCD. 
• Macintosh users: If the image does not appear on the screen, hold the OPTION button & press F7 to toggle the screens.