• To turn on the LCD, press the ON button located the switch box found on the right side of the teaching station.

• Choose either COMPUTER or VIDEO

• using a laptop, connect vga cable to vga port on laptop/powerbook. 

• Connect network & audio cable if necessary.

• To increase or decrease the volume, turn the volume button on the external speaker, found beside the screen.
• VCR controls are also located on the switch box.

• When finished using the LCD projector, press the OFF button.

• Gateway users: If image appears on the computer, but not on the projection screen, hold FN & press F3 key to toggle from PC to PC & LCD or LCD.
• Macintosh Titanium users: If the image does not appear on the screen, hold the OPTION button & press F7 to toggle the screens.

•  

 Note: This LCD System will not operate if the network is down.