1. Connect VGA cable to VGA port on laptop or powerbook.
2. Connect network cable & audio cable if necessary.
3. Aim the remote at the projector, & press the ON button,.
5. Press the INPUT button for computer projection (Input 1) or video
projection (Input 3)
6. Turn the computer on at this point.
PENDING: If playing a video, turn external speaker on.
7. Press play on the vcr.
8. When there is no INPUT signal for more than 15 minutes, the projector
will shut off.
9. Press Light button on bottom of remote for backlight.
10. At the Mouse/Adj location, make sure slide lever is on Adj.
11. When you turn the power off, the LCD will cool down for about
1 minute. During
The cool down time, the projector lamp will not turn on.
Gateway users: If image appears on the computer, but not on the
projection screen, hold FN & press F3 to toggle from PC to
PC & LCD or LCD.
Macintosh users: If the image does not appear
on the screen, hold the OPTION button & press F7 to toggle the
screens.
|
