1. Macintosh Powerbooks & Gateway laptops connect the VGA cable to VGA port on laptop, connect network if necessary.
2. Aim the remote, found in the locked cabinet, at the projector and press the ON button.
NOTE: The remote controls are kept in the locked cabinet.
3. For laptop projection, press the INPUT button until Input 1 appears on the screen.
4. Turn your computer on.
Macintosh users:
If you are not getting an image on the screen, hold the OPTION button
& press F7 to toggle the screens.
For Gateway Users:
To send signal from the Gateway to the projector, hold down the FN
Button & press F3. This works as a toggle switch. Press once & it will
Send signal to LCD, press again for LCD & PC, press again for just PC.
.
5. For VHS or DVD projection, press the INPUT button until Input 3 appears on the screen.
6. Make sure the Reciever in the cabinet is turned on.
7. Press the Speaker A & B buttons.
8. Press play on the VCR or DVD.
.
9. For audio from the keyboard, press the Tape 2 button
on the receiver. Audio for the radio, record player or CD press the corresponding buttons on the receiver.
|
