TO USE LAPTOP:

•  Connect VGA cord coming out from the ELMO into your laptop.

•  To turn on the LCD, press the ON button located on the remote.

•  Press the INPUT button until you see INPUT 1(computer) or INPUT 3 for video.

•  Turn on the Main Power switch on the ELMO.

•  Press the RGB1 button located on the front panel of the ELMO.

•  Turn on laptop & the image should appear on the screen.

• Gateway users : If image appears on the computer, but not on the projection screen, hold FN & press F3 to toggle from PC to PC & LCD or LCD.
• Macintosh users : If the image does not appear on the screen hold the OPTION button & press F7.

TO USE ELMO:

• Turn on the LCD projector by pressing the ON button located on the remote control.
• Press the INPUT button until you see INPUT 1.
• Press the Main Power button on the front panel of the Elmo.
• For showing a transparency, press the LAMP button on the front panel until the base light turns on.
• For projecting printed material or 3-D objects, press the LAMP button on the front panel until the upper lamps turn on.