Phelps 206

Room Capacity 20

• IBM Thinkpad laptops, Macintosh G3 Powerbooks or Gateway laptops connect VGA Cable to laptop.
• Aim the remote at the projector, & press the lamp "power on" button, located on the upper left side of the remote control.
• Press the INPUT button for Macintosh computer projection (INPUT 1), Laptop projection (INPUT 2), or Video projection (INPUT 3).
• Turn the computer on.
• When there is no INPUT signal for more than 15 minutes, the projector will shut off.
• Press Light button on bottom of remote for backlight.
• At the Mouse/Adj location, make sure slide lever is on Adj.
• When you turn the power off, the LCD will cool down for about 1 minute. During the cool down time, the projector lamp will not turn on.
• At the Mouse/Adj location, make sure button is on Adj unless you want to use the laser pointer or black screen. If you would like to use these functions, move the button to Mouse.
• Note: In order to turn the projector on/off, change INPUT, & change volume the button must be at Adj.